PA4FP 13cm

2320MHz Antenna system

For use at 2320MHz, i did build a 1.5 meter dish, it has 3 single band feed horns in front of it.
In the middle the 13cm band feed, and left and right a 6 and 9cm horn feed.
When using the 6 or 9cm band feed, the antenna rotator must turned a vew degrees.

The 13,9 and 6cm 1.5 meter dish can be found above the 23cm 1.9 meter dish on the picture right

1.5 meter Dish (upper) Dish in use for 13,9 & 6cm

Transverter for 2320MHz

After building the 23cm transverter i dicided to make also the same for 13cm (2320MHz).
All ready to use to pick up as a portable station.
Home made transverter including Crystal oven for 2320MHz
Surplus FET P.A. 60W solid sate output at 13cm.

This transverter is completed within a vew mounths with the final PA, who will deliver 350W output at 13cm (2320MHz)
Pictures will be placed when ready.

Insite the 2320MHz transverter

At the left down under, you can find the home made transverter on the picture right.
The 60W P.A. is mounted half in half out the cabinet.

Back site of the transverter

At the back of the cabinet TX and RX output for 13cm are separate.
2 coax cables are going up into the mast head mounted switch box

60W / 28Volts Power amplifier